Implementation of a traceability system and safe manufacturing medications in a clean room. / Implantación de un sistema de trazabilidad y elaboración segura de medicamentos en la sala blanca.

OBJECTIVE: To describe the process of implementing a traceability and safe drug manufacturing system in the clean room of a Pharmacy Service to increase patient safety, in accordance with current legislation. METHODS: The process was carried out between September 2021 and July 2022. The software program integrated all the recommended stages of the manufacturing process outlined in the "Good Practices Guide for Medication Preparation in Pharmacy Services" (GBPP). The following sections were parameterized in the software program: personnel, facilities, equipment, starting materials, packaging materials, standardized work procedures, and quality controls. RESULTS: A total of 50 users, 4 elaboration areas and 113 equipments were included. 435 components were parameterized (195 raw materials and 240 pharmaceutical specialties), 54 packaging materials, 376 standardized work procedures (123 of them corresponding to sterile medicines and 253 to non-sterile medicines, of which 52 non-sterile were dangerous), in addition 17 were high risk, 327 medium risk, 32 low risk, and 13 quality controls. CONCLUSIONS: The computerization of the production process has allowed the implementation of a traceability and secure drug manufacturing system in a controlled environment in accordance with current legislation.

Investigation of the hospital pharmacy profession in Europe.

OBJECTIVE: From 1995, the European Association of Hospital Pharmacists (EAHP) has regularly investigated the progress of the hospital pharmacy profession in Europe, and identified key barriers and drivers of this. The most recent 'Investigation of the Hospital Pharmacy Profession in Europe' was conducted from November 2022 to March 2023. METHODS: The online questionnaire was sent to all hospital pharmacies in EAHP member countries. The investigation was drafted using the same questions as the 2015 baseline survey. Where possible and relevant, responses were compared with the data from previous surveys that monitored the implementation of the EAHP statements. Keele University, Centre for Medicines Optimisation, School of Pharmacy and Bioengineering, UK analysed the data. RESULTS: The overall number of responses was 653, with a better response rate of 19% compared with 14% in 2018 statements survey. The findings indicated that participating hospital pharmacies have similar characteristics to previous surveys. Section 1 (Introductory statements and governance), section 2 (Selection, procurement and distribution), section 3 (Production and compounding), section 5 (Patient safety and quality assurance) questions were generally answered positively, with results ranging from 52% to 90%. However, results for section 4 (Clinical pharmacy services) returned lower levels of positivity, with responses from 8 of the 15 questions being less than 60%. When asked what is preventing hospital pharmacists from achieving implementation of these activities, most answers were limited capacity, not considered to be a priority by managers, or other healthcare professionals do this. The last section focused on self-assessment and action planning, with fewer than 50% of positive responses; COVID-19 preparedness and vaccines with mixed positive and negative responses. Furthermore, implementation of the falsified medicines directive impacted the medication handling processes in 50% or more of the answers. Regarding sustainability, the majority (59%) of respondents felt a greater focus should be on sustainability from an organisational or management perspective. CONCLUSION: Results offer valuable insights into the hospital pharmacy profession throughout Europe. While there have been improvements in certain areas, challenges remain, particularly in implementing clinical pharmacy services. The findings provide a foundation for further dialogue, advocacy, and strategic planning to advance the role of hospital pharmacists and enhance patient care in Europe's healthcare systems.

Detection and reduction of errors in parenteral nutrition compounding through gravimetric and product control. / [Artículo traducido] Detección y reducción de errores en la elaboración de la nutrición parenteral mediante control gravimétrico y de producto.

OBJECTIVE: To analyze the errors in the preparation of parenteral nutrition in a Pharmacy Service, detected through an already consolidated gravimetric and product quality control, and compare them with those detected during the initial years of implementing this quality control. METHODS: All errors detected through quality control in the compounding of pediatric and adult parenteral nutrition between 2019 and 2021 were prospectively analyzed. This quality control consisted of 3 sequential processes: a visual check, a gravimetric control, and a product control. Errors were classified as gravimetric, when the nutrition had a deviation of more than 5% from the theoretical weight, or as product errors when a qualitative or quantitative error was detected upon reviewing the remainder of the components used. These errors were analyzed in terms of type and the component involved. A comparison was made with the errors detected during the implementation phase of this quality control from 2016 to 2018. RESULTS: A total of 41,809 parenteral nutritions were reviewed, and 345 errors were detected (0.83% of the preparations); of these, 59 errors were found in pediatric nutritions (0.68% of them), and 286 in adult nutritions (0.86% of them). Among these errors, 193 were of gravimetric nature, while 152 were detected through product control. The main components involved in product errors were electrolytes, primarily due to the addition of excessive volumes and the use of incorrect components. A significant absolute reduction of 0.71% (p < 0.05) in the total number of errors was observed when compared to the implementation phase. This reduction was consistent in both gravimetric errors (-0.59%) and product-related errors (-0.12%) (p < 0.05). CONCLUSIONS: Comprehensive quality control of parenteral nutrition preparation is an easily implementable tool that effectively detected and prevented significant errors. Furthermore, its widespread adoption contributed to a reduction in the overall error count.

Detection and reduction of errors in parenteral nutrition compounding through gravimetric and product control.

OBJECTIVE: To analyze the errors in the preparation of parenteral nutrition in a Pharmacy Service, detected through an already consolidated gravimetric and product quality control, and compare them with those detected during the initial years of implementing this quality control. METHODS: All errors detected through quality control in the compounding of pediatric and adult parenteral nutritions between 2019 and 2021 were prospectively analyzed. This quality control consisted of 3 sequential processes: a visual check, a gravimetric control, and a product control. Errors were classified as gravimetric, when the nutrition had a deviation of more than 5% from the theoretical weight, or as product errors when a qualitative or quantitative error was detected upon reviewing the remainder of the components used. These errors were analyzed in terms of type and the component involved. A comparison was made with the errors detected during the implementation phase of this quality control from 2016 to 2018. RESULTS: A total of 41,809 parenteral nutritions were reviewed, and 345 errors were detected (0.83% of the preparations); of these, 59 errors were found in pediatric nutritions (0.68% of them), and 286 in adult nutritions (0.86% of them). Among these errors, 193 were of gravimetric nature, while 152 were detected through product control. The main components involved in product errors were electrolytes, primarily due to the addition of excessive volumes and the use of incorrect components. A significant absolute reduction of 0.71% (P < .05) in the total number of errors was observed when compared to the implementation phase. This reduction was consistent in both gravimetric errors (-0.59%) and product-related errors (-0.12%) (P < .05). CONCLUSIONS: Comprehensive quality control of parenteral nutrition preparation is an easily implementable tool that effectively detected and prevented significant errors. Furthermore, its widespread adoption contributed to a reduction in the overall error count.

Physicochemical and biological stability of diluted vedolizumab in intravenous infusion bags.

INTRODUCTION: Intravenous vedolizumab is a widely used monoclonal antibody for outpatients with inflammatory bowel disease. Drug preparation is performed on the day of administration, but is time consuming, causing unnecessary in-hospital patient delay and inefficient logistics for preparation and distribution. Storage of vedolizumab ready-to-administer infusions and distribution via pneumatic air tubes could streamline logistics in the outpatient setting. The aim of this study was to test the shelf life and stability of ready-to-administer intravenous infusion bags containing vedolizumab. METHODS: For assessing in-use shelf life, the reconstituted product (300 mg fixed dose) was diluted to a concentration of 1.2 mg/mL in 0.9% NaCl under aseptic conditions, and stored in polyolefin infusion bags at 2-8°C prior to analysis. On replicate samples, we measured concentration, physical and chemical stability using sodium dodecyl sulphate polyacrylamide gel electrophoresis, size exclusion chromatography, and multi-angle laser light scattering, as well as biological activity using a biolayer interferometry assay to study target engagement, and endotoxin content to assess microbiological stability. Stability of ready-to-use vedolizumab was assessed also after transportation via pneumatic tube system. Samples were taken at different time points over an observation period of 30 days on four replicate samples. RESULTS: For all parameters assessed, the ready-to-use solution of vedolizumab remained stable over a period of at least 30 days. There were no signs of protein aggregation, chemical instability, or loss of binding of the antibody to the α4ß7 integrin target. There was no increase in endotoxin concentration over time. No significant difference was seen in antibody structural stability and protein aggregation between samples before and after transportation via pneumatic tube system. CONCLUSION: When prepared under aseptic conditions, dissolved ready-to-administer vedolizumab infusion bags can be stored long term at 2-8°C and transported via pneumatic air tube, without observable loss of antibody stability or binding activity.

Quality assurance standards and their use in the preparation of parenteral systemic anticancer therapy products in healthcare establishments: a scoping review.

OBJECTIVES: The use of parenteral systemic anticancer therapy (SACT) has led to improved cancer survival. A quality assurance (QA) system of the aseptic compounding process is necessary to ensure safe and consistent production of parenteral SACT. This scoping review identifies international evidence and practice relating to QA standards in the preparation of parenteral SACT in healthcare establishments. METHODS: Standards relating to aseptic compounding in hospital pharmacies and literature exploring the aseptic compounding of parenteral SACT were included. Literature relating to the non-aseptic compounding of medicines and records specific to sterile manufacturing in industrial settings were excluded. A search of several electronic databases, trial registries, the grey literature and websites of key European hospital pharmacy groups and accreditation bodies was conducted on 16 March 2022. A narrative discussion was performed by country, and content analysis of articles was conducted. RESULTS: Thirty-seven records were included. Standards reviewed covered the work environment, the preparation process and the safety of the workers who are potentially exposed to hazardous chemicals. It was a common practice to include frequent audits to ensure adherence to standards. Some standards also recommended external inspections to allow for further learnings. Periodic reviews are encouraged to ensure standards maintain relevance. National standards of the countries reviewed were based on international standards, with minor adaptations for local conditions. CONCLUSIONS: The main limitation of this review is that it is limited to countries with a high human development index. The review shows that the use of an internationally recognised standard as a basis for national standards is best practice, and will allow for relevance into the future.

Medication use in a cohort of adults with chronic intestinal failure: A prospective cross-sectional study.

BACKGROUND: Oral drug therapy may be compromised in chronic intestinal failure (IF) because of alterations in absorption and transit. Only scarce literature is available on which medication patients with chronic IF take in daily life. The aim was to describe the medication use in these patients. METHODS: A medication history was obtained from adults with chronic IF treated in our tertiary care IF center. Degree of polypharmacy, drug classes, Biopharmaceutics Classification System classes, route of administration, and formulation of drugs were analyzed. RESULTS: From October 2019 until December 2020, 72 patients (35 patients with short bowel syndrome [SBS] and 37 patients without SBS) were included. Polypharmacy was seen in 85.7% of patients with SBS and 75.7% of patients without SBS. The top three drug classes were proton-pump inhibitors, vitamin D or acetaminophen, and antimotility medication or laxatives/benzodiazepines. Approximately 25% of the drugs were classified as Biopharmaceutics Classification System class I drugs. In patients with SBS (78%) and patients without SBS (74.9%), most medication was taken orally, requiring gastrointestinal absorption of the active substance to be pharmacologically active. Most of these medications (77% in patients with SBS and 80.8% in patients without SBS) were formulated as a capsule or tablet, requiring disintegration and dissolution in the gastrointestinal tract before absorption can take place. CONCLUSION: Polypharmacy was observed in most patients with chronic IF. Most medication was taken orally in formulations requiring disintegration, dissolution, and gastrointestinal absorption, which could be compromised in chronic IF.

Stability Study of a Compounded Sublingual Buprenorphine Solution for Neonatal Opioid Withdrawal Syndrome.

OBJECTIVE: Sublingual (SL) buprenorphine is a cornerstone of care in the treatment of adult opioid use disorder. Recent studies have demonstrated its advantages in the management of neonatal opioid withdrawal syndrome (NOWS). Commercially available SL tablets and transdermal patches are not amenable to neonatal use, and published compounding formulas of SL solutions contained undesirable excipients, including ethanol, sugars, and preservatives. The objective of this research is to explore the stability of a novel SL buprenorphine formulation free of alcohol, sugars, and preservatives. METHODS: A 0.075 mg/mL buprenorphine solution was prepared by diluting the commercial injectable solution with normal saline and packaged into polyethylene terephthalate amber prescription bottles and polypropylene amber oral syringes and stored in refrigeration. Quality assessments were conducted by visual, pH, and high-performance liquid chromatography (HPLC) analysis immediately after preparation, and at 7 and 14 days of storage. RESULTS: There were neither visual nor pH changes detected through 14 days. HPLC analysis indicated that all samples retained >99% initial buprenorphine concentration. Drug concentration increased slightly in the oral syringe after day 7, probably due to moisture loss. No degradation peaks were observed in chromatograms. CONCLUSIONS: This novel buprenorphine is free of alcohol, sugar, and preservatives, and it may offer a significant safety advantage for NOWS patients. Additional clinical studies are recommended to verify the bioavailability and efficacy of this formulation.

Physical compatibility of lipid emulsions and intravenous medications used in neonatal intensive care settings.

OBJECTIVE: The purpose of this study was to investigate the physical compatibility of intravenous lipid emulsions with parenteral medications used in neonatal intensive care. METHODS: Lipid emulsion and drug solutions were combined 1:1 in glass vials, inspected for physical incompatibility at 0, 1 and 2 hours, and assessed on the basis of lipid droplet size at 0 and 2 hours after mixing. Intravenous fluid controls (Water for Injection, sodium chloride 0.9% w/v, glucose 5% w/v), positive controls (gentamicin, albumin), negative controls (metronidazole, paracetamol, vancomycin) and 21 previously untested drug combinations were evaluated. RESULTS: No phase separation, change in colour, gas production or other visible anomaly was observed. The between-run mean droplet diameter (MDD) for SMOFlipid20% alone (0.301±0.008 µm) was comparable to the lipid emulsion/intravenous fluid and lipid emulsion/drug solution combinations. In addition to gentamicin and albumin, caffeine citrate (20 mg/mL) was shown to be incompatible with the lipid emulsion. All other lipid:drug combinations were compatible, based on the MDD data. CONCLUSION: Intravenous lipid emulsions were found to be compatible with 20 parenteral medications, including antimicrobial agents, inotropes, anti-inflammatory drugs and caffeine base, in simulated Y-site conditions. The lipid emulsion was incompatible with caffeine citrate injection.

Systematic review of room temperature stability of key beta-lactam antibiotics for extended infusions in inpatient settings.

BACKGROUND: Extended infusion (EI) of beta-lactam antibiotics may offer clinical benefits aligned with improved probability of target attainment for critical pharmacokinetic/pharmacodynamic parameters that correlate with efficacy. There is much research interest in prolonged and continuous infusions (collectively, extended infusions) of beta-lactams to improve patient outcomes, particularly in critically ill patients in intensive care. While definitive clinical trial data demonstrating beneficial outcomes is awaited, there has been limited focus on the stability of the agents given by EI, which may be an equally critical parameter. EI may allow for savings in nursing time due to reduced need for drug reconstitution. We set out to examine the data for stability for EI at room temperature, consistent with the requirements of 'A Standard Protocol for Deriving and Assessment of Stability- Part 1 Aseptic Preparation (Small Molecules)', which allows a 5% loss of active pharmaceutical ingredient (API) applicable for those territories that use the British Pharmacopoeia also for a 10% loss applicable in much of rest of the world. METHODS: Searches using preferred reporting items for systematic reviews and meta-analyses (PRISMA) principles for stability data on freshly prepared beta-lactam antimicrobials for extended administration at room temperature (at or above 23°C) were conducted in November 2021 and updated in December 2022. RESULTS: We found data to support the extension of the shelf life of 12 key beta-lactam antibiotics once reconstituted (aztreonam, amoxicillin, benzylpenicillin, flucloxacillin, piperacillin/tazobactam, cefazolin, cefmetazole, ceftaroline, ceftazidime, ceftriaxone, imipenem and meropenem) compliant with the NHS protocol, and data for five other agents (ticarcillin, cefepime, cefiderocol, cefoxitin and doripenem) which would be acceptable in regions outside the UK beyond that listed in the Summary of Product Characteristics.This review has not been registered under PROSPERO.

Capillary electrophoresis in parenteral nutrition control - validation of two analytical methods: Amino acids/glucose/glucose-1-phosphate and K/Na/Ca/Mg.

OBJECTIVES: Production of parenteral nutrition bags (PNBs) involves many nutrients: complete control of the production process decreases the risk of error. This study aimed to develop and validate two analytical methods by capillary electrophoresis (CE) for simultaneous detection of: glucose, amino acids (Primene®) and glucose-1-phosphate (Phocytan®) (anionic method, AM) on one hand; and on the other hand potassium, sodium, calcium and magnesium (cationic method, CM). METHODS: Methods were developed using capillary electrophoresis with diode array detection (CE-DAD) (CE 7100, Agilent), indirect photometric detection, 56 cm long capillary and two different buffers (pH=12.1 for AM and pH=3.2 for CM). These methods were validated according to guidelines from the Société Française des Sciences et Techniques Pharmaceutiques (SFSTP).Analytical parameters were optimised: temperature was regulated at 15°C and the current settled to - 15kV, for a 21 minute analysis time for AM. Conditions were settled to 25°C and 30kV for CM so the analysis time dropped to 7 minutes.Accuracy profiles were established and recovery rates (RR), Repeatability and Reproducibility Coefficient of Variation (respectively RaCV and RoCV) were calculated.Capability was also calculated for each nutrient and concentration range according to guidelines from the Evaluation and Research Group on Protection in a Controlled Atmosphere (GERPAC). RESULTS: Methods were successfully validated with: RR between 99.2 and 101.9%, RaCV between 1.5 and 3.1%, and RoCV between 2.4 and 4.1% for AM, and RR between 97.5 and 102.7%, RaCV between 0.5 and 2.3%, and RoCV between 0.6 and 2.8% for CM.Accuracy profiles were established with 95% ß probability, except for glucose-1-phosphate (90%). Acceptance limits were settled to ±1 0% of target value. Capabilities are defined as "good" or "very good". CONCLUSIONS: The methods developed by this research will ensure the composition of PNB is compliant to PNB formulas. These results show CE is an appropriate method for PNB quantitative control.CE utilisation for controlling other hospital preparations seems to be a relevant alternative to conventional methods such as liquid chromatography.

Physicochemical stability of high-concentration cefuroxime aqueous injection reconstituted by a centralised intravenous additive service.

OBJECTIVES: Hospital pharmacies provide centralised intravenous additive services (CIVAS), such as antibiotic reconstitution. The aim of this study was to demonstrate the physicochemical stability of high-concentration cefuroxime sodium in aqueous injections, which is mandatory for the centralised preparation of products with automation. METHODS: The physicochemical stability of three high-concentration injections (1.5 g of cefuroxime sodium in 15 mL, 16 mL and 18 mL of water for injection (WFI)) were studied in two primary packing materials (glass vials and polypropylene syringes). The samples were reconstituted with automation in three mid-sized hospital pharmacies in a good manufacturing practice (GMP) grade A/B cleanroom. During the study, the samples were stored in refrigerated conditions (4°C) and 1.5 g/15 mL solution in ambient temperature (22°C). Cefuroxime and descarbamoyl cefuroxime were analysed by high-performance liquid chromatography with UV detection. In addition, the appearance, pH and uniformity of dosage units were investigated. RESULTS: The freshly prepared cefuroxime injections fulfilled the criteria of content uniformity (acceptance value (AV) <15). A significant decrease in concentration of cefuroxime and increase in content of descarbamoyl cefuroxime was observed in all injections. Cefuroxime aqueous injections were physiochemically stable for up to 14 days under refrigeration storage. The relative content of descarbamoyl cefuroxime remained under 3% at 4°C. The solution of 1.5 g/15 mL was stable for only 20 hours in formulations stored for the first 14 days at 4°C and then transferred to 22°C. The colour of the solution changed from light yellow to a darker yellow, and the pH value of the solutions increased during storage. Neither primary packing materials, commercial source of cefuroxime sodium nor exposure to light had any significant effect on the stability of formulations. CONCLUSIONS: Although limited, we found the shelf life of high-concentration cefuroxime injections in refrigerated conditions sufficient for centralised antibiotic preparation in hospital pharmacy with automation. The limited shelf life of high-concentration cefuroxime injections must be considered when using these formulations.

Safety and pharmacokinetic comparison between fenofibric acid 135 mg capsule and 110 mg enteric-coated tablet in healthy volunteers.

This study aimed to compare the pharmacokinetic (PK) and safety profiles of 2 fenofibric acid formulations under fasting and fed conditions. The reference was a 135 mg capsule, while the test was a 110 mg enteric-coated tablet. This randomized, open-label, two-sequence, two-period crossover phase 1 clinical trial was conducted in healthy Korean men. Sixty participants were enrolled in each of the fasting and feeding groups. Blood samples were collected 72 hours after drug administration. PK parameters were calculated using a non-compartmental method with Phoenix WinNonlin®. A total of 53 and 51 participants from the fasting and feeding groups, respectively, completed the study. The geometric mean ratio and 90% confidence intervals of the maximum concentration (Cmax) and area under the concentration-time curve to the last measurable plasma concentration were 0.9195 (0.8795-0.9614) and 0.8630 (0.8472-0.8791) in the fasting study and 1.0926 (1.0102-1.1818) and 0.9998 (0.9675-1.0332) in the fed study, respectively. The time to reach Cmax of the enteric-coated tablet compared to that of the capsule was extended by 1 and 3 hours under fasting and fed conditions, respectively. In conclusion, enteric-coated tablets have a higher bioavailability than capsules. In addition, the enteric-coated tablet was smaller than the capsule, making it easier for patients to swallow. Trial Registration: Clinical Research Information Service Identifier: KCT0007177, KCT0003304.

Predictive stability, novel HPLC-MS analysis and semi-automatic compounding process for the emergency implementation of a production line of pancuronium in injectable solution.

During the early months of the COVID-19 pandemic, the international medical product supply chain was tight, causing breaks in the availability of neuromuscular blocking agents essential for the treatment of patients in intensive care units. The present study describes the pharmaceutical development of an injectable 2 mg/mL solution of pancuronium bromide (PC) in a very short lapse of time. The sterile solution was compounded into a good manufacturing practice grade A clean room, filtered (0.2 µm) and filled into 10 mL type I glass, manually sealed with bromobutyl rubber stoppers. A novel HPLC-MS stability indicating method for pancuronium quantification and its degradation product was developed and validated. This fast, sensitive and straightforward method was used to study the stability of the formulation using a semi-predictive method, enabling a very fast attribution of a temporary shelf-life, which was confirmed by a classic prospective stability study. The production line and the analytical tools set-up were performed in six weeks and the semi-predictive stability study was conducted in 90 days, allowing us to predict a shelf life, which was successfully confirmed by prospective study. In conclusion, using innovative methods, we were able to rapidly overcome the shortage of a critical drug.

Cistracurium Besylate 10 mg/mL Solution Compounded in a Hospital Pharmacy to Prevent Drug Shortages: A Stability Study Involving Four Degradation Products.

BACKGROUND: Stability study of a 10 mg/mL injectable cisatracurium solution stored refrigerated in amber glass ampoules for 18 months (M18). METHODS: 4000 ampoules were aseptically compounded using European Pharmacopoeia (EP)-grade cisatracurium besylate, sterile water for injection, and benzenesulfonic acid. We developed and validated a stability-indicating HPLC-UV method for cisatracurium and laudanosine. At each stability study time point, we recorded the visual aspect, cisatracurium and laudanosine levels, pH, and osmolality. Sterility, bacterial endotoxin content, and non-visible particles in solution were checked after compounding (T0) and after M12 and M18 of storage. We used HPLC-MS/MS to identify the degradation products (DPs). RESULTS: During the study, osmolality remained stable, pH decreased slightly, and the organoleptic properties did not change. The number of non-visible particles remained below the EP's threshold. Sterility was preserved, and bacterial endotoxin level remained below the calculated threshold. Cisatracurium concentration remained within the ±10% acceptance interval for 15 months and then decreased to 88.7% of C0 after M18. The laudanosine generated accounted for less than a fifth of the cisatracurium degradation, and three DPs were generated-identified as EP impurity A, impurities E/F, and impurities N/O. CONCLUSION: Compounded 10 mg/mL cisatracurium injectable solution is stable for at least 15 months.

Utilization of a technology-assisted workflow to prepare controlled substance oral syringes.

PURPOSE: Utilization of technology-assisted workflow (TAWF) systems has gained popularity in the sterile compounding setting. This study was designed to evaluate whether safety and efficiency could be seen when preparing oral controlled substance doses gravimetrically vs volumetrically. METHODS: This 2-phase observational study combined manual data collection with automated logs generated by a single TAWF. During phase I, oral controlled substance solutions were prepared volumetrically. In phase II, the same subset of medications was to be prepared gravimetrically via the same TAWF. Findings from phases I and II were compared against each another to determine safety, efficiency, and documentation differences between the volumetric and gravimetric workflows. RESULTS: Thirteen different medications were evaluated during phase I (1,495 preparations) and phase II (1,781 preparations) of this study. Mean compounding time (min:sec) increased in phase II when compared to phase I (1:49 vs 1:28; P < 0.01), with the deviation detection rate also increasing (7.9% vs 4.7%; P < 0.01). Despite a target in phase II of utilizing gravimetric analysis for more than 80% of preparations, only 45.5% (811 preparations) were prepared with this workflow, as adoption challenges and dose size limitations prevented compliance. Doses that were prepared gravimetrically had a mean accuracy rate of 100.6% (the mean achieved dose was 0.6% higher than the mean prescribed dose) and a rejection rate of 0.99% (compared to the phase I rejection rate of 1.07%; P = 0.67). CONCLUSION: The gravimetric workflow provided accuracy and additional safety checks when compared to the volumetric alternative, all while providing users with greater access to data. Health systems should consider staffing, product sourcing, patient populations, and medication safety when determining the balance between volumetric and gravimetric workflows.

Qualification and impact of a video-assisted control system in a chemotherapy compounding unit.

OBJECTIVES: Anticancer drug preparation control is essential to ensure quality and patient safety. Drugcam (Eurekam Company) is a digital video-assisted control system based on artificial intelligence methods to identify vials used and volumes withdrawn. As for any control system, qualification is required before use in a chemotherapy compounding unit (CCU). METHODS: We conducted an operational qualification (sensitivity, specificity and accuracy assessment of vials and volumes recognition and quantitative analysis of measured volumes) and a performance qualification (comparison with visual control) of Drugcam in our CCU, as well as an impact study on compounding time and compound supply time. RESULTS: Sensitivity, specificity and accuracy of vials (94%, 98% and 96%, respectively) and volumes (86%, 96% and 91%, respectively) recognition are satisfactory. It depends on both the object presented and the camera tested. False positives, which could lead to release of non-compliant preparation, were detected. Volume reading errors may exceed the tolerance threshold of ±5% for small volumes. Drugcam did not significantly lengthen compounding time and compound supply time. CONCLUSIONS: No recommendations for a qualification method of this new type of control equipment exist. However, a qualification process is essential to understand tool limitations and integrate them into the CCU risk management system. Drugcam enables anticancer drug preparation to be secure and is also useful for initial and continuous staff training.

Automation of parenteral nutrition: impact on process and cost analysis.

OBJECTIVES: On the basis of its safety and accuracy, automation is recommended for parenteral nutrition (PN). The aim of this study was to highlight the changes in practices related to the automation of PN and to perform a cost study comparing manual vs automated production costs. METHODS: We conducted a micro-costing study using 1 year of manual production data for adult, neonatal and paediatric PN bagsat a hospital. We used the data to estimate the costs of automating the production process for adult, neonatal and paediatric bags. RESULTS: Major modification to the PN production process resulted in: rationalisation of raw materials, computerisation and optimisation of human needs. Switching from a manual to an automated process reduced the cost of neonatal/paediatric custom bags (€130.73 vs €124.58) and semi-custom bags (€172.08 vs €166.86); but increased the cost of adult bags (€93.06 vs €127.92). CONCLUSIONS: The changes resulting from the automation and revision of the production process globally increased annual expenditures by approximately 9.7%. However, automation minimised the risk of misproduction, bag contamination, and led to a more secure production process that reduced risks incurred by the teams. In view of the gain in patient and staff safety (linked to the use of an automated compounding device) the moderate economic impact (<10%) should not deter the automation of PN production circuits.

Vial Sharing of High-Cost Drugs to Decrease Leftovers and Costs: A Retrospective Observational Study on Patisiran Administration in Bologna, Italy.

Waste of high-cost medicines, such as orphan drugs, is a major problem in healthcare, which leads to excessive costs for treatments. The main objective of this study was to evaluate the impact of a vial-sharing strategy for patisiran, an orphan drug used for the treatment of hereditary transthyretin-mediated amyloidosis, in terms of a reduction in the discarded drug amount and cost savings. The retrospective observational study was conducted in a tertiary referral center (Emilia-Romagna, Italy), between February 2021 and November 2022. Data on drug waste were calculated as "(mg used-mg prescribed)/mg prescribed" for each session. We found a statistically significant (-9.14%, p < 0.001, 95% CI 5.87-12.41) absolute difference in mean discarded drug rates per session based on the study phase (before and after vial-sharing introduction) at the two-sample t-test. The absolute difference corresponded to a percentage decrease in the average reduction in the discarded drug rate with vial sharing of 82.96% per session. On an annual scale, the estimated cost savings was EUR 26,203.80/year for a patient with a standard body weight of 70 kg. In conclusion, we demonstrated that a patisiran vial-sharing program undoubtedly offsets some of the high costs associated with this treatment. We suggest that this easy-to-introduce and cost-effective approach can be applied to the administration of other high-cost drugs.